FLAMED FULL FENDERS

LIMITED EDITIONS

EMBOSSED FLAMES FULL FENDERS WITH

ALL BRACKETS  $ 2,199.95  PAIR

 SUPER SPECIAL - FULL FENDERS WITH ALL MOUNTING

ALL BRACKETS  $ 2,199.95  PAIR  DELIVERED

NEW - TRICK - LOW CUT FIBERGLASS FENDERS - WILL FIT ANY TRUCK

DELIVERED IN 2 WEEKS OR LESS 

ONLY $ 2295 + FREIGHT WITH ALL MOUNTING BRACKETS

OR $1800 + FREIGHT WITHOUT BRACKETS

32 CHROME LOW CUT FENDERS

The Low Cut Fender is just like our regular full fenders but with a longer drop down between the tires. If you would like more of your tire covered up -- this is the fender for you.

Gel Coat Colors:

	Gray Primer
	Black
	White

Painting:

The black and white gloss gel coat can be waxed and installed without painting.   If your fenders need to be painted to match the color scheme of your truck we recommend painting the sandable, gray primer gel coat fenders. 

Mounting Brackets:

	Tubular steel with 1/4" wall
	Flat plates 3/8" thick
	Gusseted corners
	Mitered cuts
	Capped ends
	Grade 8 & stainless bolts included
	Built Tuff - Built to Last
	Available with Standard (52") spacing

We offer technical support by phone at 920-822-2465 during regular business hours. 

Prices are subject to change.
US Dollars

Recommended 5th Wheel Height for all 32 CHROME Fenders
(measure from ground to top of fifth wheel)

If you have:
22.5 low pro tires	48"
22.5 standard tires	49"
24.5 low pro tires	49"
24.5 tall rubber	51"

This is the minimum height we recommend. This does not guarantee you will not hit the fenders with the trailer, but in our experience it has been sufficient. The higher the 5th wheel the better!

LOW CUT FENDERS WITH

ALL BRACKETS  $ 1,799.95  PAIR

---

 FULL FIBERGLASS REAR FENDERS

     

RIBBED FULL FENDERS WITH

ALL BRACKETS  $ 1,799.95  PAIR

---

32 CHROME FULL FENDERS

W.T.I. 's full fiberglass fenders are just what you need to add the finishing touch to your truck or trailer.  Our fenders are hand fabricated using the highest quality fiberglass materials for long lasting durability.
The Full Fiberglass Fenders is the first product W.T.I. introduced. The fender you see today is actually the second generation of fender. The second generation fender was designed from the ground up, not a copy of some other fender.

When designing and engineering this fender many things were taken into consideration.

• First and foremost, looks. We wanted a fender that looked good yet is functional.

• A fender and bracket design that would fit most makes and models of trucks on the road today.

• Also, a fender that is durable and if damaged, easily fixable.

The WTI Full Fenders drop down and roll around farther on the tire than most fenders on the market today. This helps to keep road spray and debris from flying off your tires and hitting your truck or other traffic on the road.

We use a special liner for added strength and to improve wear against typical road hazards.  The underside flat area is reinforced with a special "V" laminated strip, which adds strength also.  This exclusive design requires no center mounting bracket or bracing.  This feature allows the fenders to move and flex with the frame. W.T.I. fenders are designed to be mounted on the front and rear, lower corners.

	Gray Primer
	Black
	White

The black and white gloss gel coat can be waxed and installed without painting.   If your fenders need to be painted to match the color scheme of your truck we recommend painting the sandable, gray primer gel coat fenders. 

	Tubular steel with 1/4" wall
	Flat plates 3/8" thick
	Gusseted corners
	Mitered cuts
	Capped ends
	Grade 8 & stainless bolts included
	Built Tuff - Built to Last
	Available for either Standard (52") or Canadian (60") axle spacing.
	Weight: 275 pounds per set (including brackets) (Approximate)

Complete step by step instructions (with pictures) are included with each kit.  Please note that due to the variations in each truck, final installation requires drilling into the frame and welding.

No mud flaps are required on W.T.I. Fenders, however if you would prefer to have mud flaps we have a mud flap bracket available.  They are welded on to the bottom of the rear fender bracket.

We offer technical support by phone at 920-822-2465 during regular business hours.

Prices are subject to change.
US Dollars

Recommended 5th Wheel Height for all W.T.I. Fenders
(measure from ground to top of fifth wheel)

If you have:
22.5 low pro tires	48"
22.5 standard tires	49"
24.5 low pro tires	49"
24.5 tall rubber	51"

This is the minimum height we recommend. This does not guarantee you will not hit the fenders with the trailer, but in our experience it has been sufficient. The higher the 5th wheel the better!